3 Basic Motorcycle Care And Maintenance For Beginners

​Bikes have a fairly straightforward mechanism. Motorbikes have fewer total electronics, two wheels, and other features contrasted to cars. Even with a simple structure, motorcycle upkeep is still something that constantly nags at us in the back of our minds. We worry about malfunctions, costly repairs, and the possibility that our bike won't be ready for us when we need it most.

1. Replace the Coolant
Whenever it's time to renew the coolant, which keeps your engine from excessive heat, freezing, or corroding, eliminate any necessary body panels to make room for the coolant to drain. Then, set a drain pan underneath the engine and remove the bolt. Remove the radiator cap to make sure it all depletes.

When everything is done, replace the drain bolt. Use a funnel to add the right amount of coolant to the system. Reinstall any removed bodywork and put the radiator cap back on. Before cutting the ignition, turn the engine on and let it warm up for a while. Remove the radiator cap and check the coolant level after the engine has cooled.

2. Maintain A Fresh Chain
Nowadays, O-ring chains dominate. Compared to the older, unsealed chains, they require less cleaning. When the chain becomes especially dirty or when the owner's manual suggests it should, you should clean it. When you do, raise your bike's rear wheel and shift into neutral to make it simple for the chain to move. Use a soft bristle brush to remove grit and grime from the chain. Rotate the back wheel while using specially formulated chain lube to lubricate the chain.

3. Get Your Bike Serviced
Oil is frequently vulnerable to heat and scaling as the primary lubricant in a motorcycle engine, reducing its toughness and performance over time. Therefore, routine oil changes must be performed appropriately to ensure that your motorbike engine is operating properly. Getting your bike serviced regularly can give you:

• Better fuel efficiency
• Reduced engine buildup and wear
• Increased engine life
• Fresh engine lubrication

Conclusion
Basic motorcycle maintenance is crucial, even though breakdowns can't always be prevented, especially when you're traveling a lot, your bike may still experience some issues. Numerous moving components on a motorcycle are prone to wear, especially if they are not regularly oiled, tried to replace, or cleaned.

The best breakdown prevention strategy involves using the seven-point checklist and regularly maintaining your motorcycle. Over time, you will also get to know your bike and when something is not right.

At Priority Insurance LLC​., we do our best in making sure that our clients are well-protected with affordable and comprehensive policies. We make sure to go the extra mile to help you with your needs. To learn more about how we can help you, please contact our agency at (864) 297-9744 or Click Here to request a free quote. Topics and coverage discussed in this article are not guaranteed, consult with your agents to determine what your policy does and does not cover. We are more than happy to help!